Re: VMWare Fusion 5 and Airplay Mirroring
Not sure how I missed the fact that you're running OSX inside the VM Are you able to successfully run AirPlay mirroring from your actual host's operating system? Do you have a USB>Ethernet adapter?...
View ArticleRe: VMWare Fusion 5 and Airplay Mirroring
Have a look at: About AirPlay Mirroring in OS X Mountain Lion Then as previously mentioned either use Bridged network Adapter in Guest or use either a USB WiFi (or Ethernet) Adapter connected directly...
View Article"open with" access lost to Windows Apps after Latest Mac OS Update
It appears as the latest Mac OS update has broke something with VMWare Fusion. Previously I could right click on a file in Finder and the "Open With" menu include all of the appropriate apps that were...
View ArticleRe: Flickering screen using Fusion 5.0.3 on latest 2013 (Haswell) MacBook Air
I made the change in one VM and set Gaming back to "Auto-detect mouse for games." So far so good. No problems for the last two hours.Shutdown the VM and opened another one. It flickered. Shut it down,...
View ArticleRe: "open with" access lost to Windows Apps after Latest Mac OS Update
I haven't applied the latest OS X update and personally usually wait a week or two before applying OS X point updates just to see what issues arise in various message boards, discussion and or support...
View ArticleRe: "open with" access lost to Windows Apps after Latest Mac OS Update
It appears you that the update broke the application preferences. To update / fix this try the steps provided in following article : Open File on your Mac with an app on windows
View ArticleRe: "open with" access lost to Windows Apps after Latest Mac OS Update
I guess you either didn't read my post or you haven't read the article that you referenced. The article says to "pick the application from the open with menu" but the problem is that NO applications...
View ArticleRe: "open with" access lost to Windows Apps after Latest Mac OS Update
sorry,if thats the case , you can repopulate the windows apps on your Mac's app folder in two ways as far as i know.1) Through unity mode : VMware KB: Adding Windows applications to your Mac's...
View ArticleWindows 7 VM with Outlook 2010 doesn't restore after networking change
Hi All, I have VMWare Fusion 5.0.3 installed on my mac running OSX 10.8.4. I use a Windows 7 VM a lot for running Microsoft office, outlook and various other windows apps that I need to run. I have...
View ArticleRe: Fusion on Mac OS Mavericks 10.9
I cannot use the "Use all display as full screen" either. I actually didn't even know that was an option. UNITY seems to have broken too, other than that things seem to be working good. I upgraded to...
View ArticleWhen connecting to Citrix desktop, mouse focus goes haywire
When connecting within VMware fusion (latest version) to a Citrix desktop using varying versions of Citrix Receiver, mouse begins working OK, but if you mouse outside of the Window, then back in -...
View ArticleRe: When connecting to Citrix desktop, mouse focus goes haywire
A few more bits of information. I've reinstalled VMware Tools a few times. Mouse focus problem does not occur when Tools are not installed, however once your mouse is inside the Citrix session, it...
View ArticleRe: Disable Lion Full Screen Mode
I've been suffering from the full-screen issue since last fall and just now found this thread hoping to find a solution or at least recognition of the issue from VMWare. I need keyboard shortcuts. When...
View ArticleMoving in and out of VM with TeamViewer?
I am using TeamViewer to remotely control my iMac. I like to run my VM on the iMac in single screen mode. I have no problem connecting to the Mac with TeamViewer, nor any problem opening VMWare and...
View ArticleClik here to view.
Re: Moving in and out of VM with TeamViewer?
I'm on a windows keyboard so I'm not sure which is the equivalent of the command key on the mac, ctrl+windows and ctrl+alt did not do it. BUT, ctrl+windows+s did do it for me, that I can at least use...
View ArticleClik here to view.
Re: Moving in and out of VM with TeamViewer?
I saw "iMac" in the opening of your question and skimmed past the part where you said "on a Windows machine", sorry, the Windows translation of Ctrl+ (or Ctrl+Command) is as you've found out...
View ArticleMouse ungrab not possible with simple click
HelloI have a problem with my mouse on vmware client"Before" the mouse could fly over betweem the host and the guest without problem making the work for me very easy by cliking where i needed it... Now...
View ArticleRe: How to improve e-mail download/upload speed of Eudora on Leopard Server...
The application Eudora works OK on Mac OS X 10.6.8 (Snow Leopard). The problem is when running on Mac OS X Server 10.6.8 on VMware Fusion 5.0.3 on Mac with OS X 10.8.4 (Mountain Lion). It is a problem...
View ArticleHow do I re-establish a 'connection' on my Lion server with VMFusion 4?
Dear Forum Users: I am in a PhD program and was sorting 'Folders' for better management and faster access to academic articles. I inadvertently changed a folder named 'WIN 7 Virtual machines' and...
View Article