Re: Installing printer
I have tried everything and cannot get the installer find the printer. The printer works on the Mac side. I have uninstalled the printer in VMWare Fusion and reinstalled, but after the installation...
View ArticleVMware Fusion / Windows 8 / Shared Folders / System Hang
Running Fusion 5.0.3 with a Windows 8 Pro -64 bit guest VM. When shared folders are enabled, and ONLY when shared folders are enabled, the system periodically hangs/freezes/beachballs whatever you...
View ArticleRe: Installing printer
Marjean wrote I need more than pass-through use. Then connect the Printer directly to the Virtual Machine. Look at the "Connecting a printer directly to a virtual machine through USB" section in the...
View ArticleRe: Installing printer
I have settings:Share Mac printers with Windows - OnDefault printer for Windows: Match the default printer on Mac Connect USB devices:Canon iP4900 series - Checked (Connect to Windows) I follow...
View ArticleClik here to view.
Re: Installing printer
I have settings:Share Mac printers with Windows - OnDefault printer for Windows: Match the default printer on Mac If you are going to connect the Printer directly to the Virtual Machine then I would...
View ArticleClik here to view.
Re: Fusion 4 for mac, (running windows 7, is stuck in suspend mode.
Hey Woody,So I rebooted the host OS (OSX). No joy . so I was gonna try the force commands , but none of them will activate (Have a look at the screen captured imge.) and it will accept no force...
View ArticleClik here to view.
Re: Fusion 4 for mac, (running windows 7, is stuck in suspend mode.
You have to press the Option Key to change the menu items! In the screen shot Resume is not grayed out so click it and then immediately click the menu again, pressing the Option Key and click Force...
View ArticleRe: Installing printer
As you suggested, I did the following. Virtual Machine's Settings set "Share Mac printers with Windows" to "Off". After installing the printer driver, the instructions on the installation CD are:"Make...
View ArticleClik here to view.
Re: My Windows 7 fails to boot on VMware Fusion on Mac
I succeeded in accessing my files, but i did not find my most recent files. I think something is missing. i just have one 2GB in my VM content. I dont know what caused that. I can find my most recent...
View ArticleRe: Installing printer
Marjean wrote: As you suggested, I did the following. Virtual Machine's Settings set "Share Mac printers with Windows" to "Off". After installing the printer driver, the instructions on the...
View ArticleRe: My Windows 7 fails to boot on VMware Fusion on Mac
ayomidotun wrote: I came across similar complains on here http://communities.vmware.com/message/2120528#2120528, with a solution by WoodyZ for MitchelleJohnson, but the SlaxVM file didn't working for...
View ArticleRe: My Windows 7 fails to boot on VMware Fusion on Mac
ayomidotun wrote: I succeeded in accessing my files, but i did not find my most recent files. Just how did you access the contents of the virtual hard disk? I think something is missing. i just have...
View ArticleWin 8: Automatic repair couldn't repair your PC - What to do?
I have VMWare Fusion running on a Mac Book Air. Installed Win8 fine. An install of Visual Studio hanged and I had to reboot Win 8, After the reboot, I can't get Win 8 to start, it says that the...
View ArticleRe: Win 8: Automatic repair couldn't repair your PC - What to do?
Diagnosing/troubleshooting technical issues usually require that one gives appropriate technical information to analyze and you've not really done that so not sure what help you expect. The bottom...
View ArticleRe: Installing printer
"USB Printing Support" under Universal Serial Bus controllers shows a yellow warning symbol with a ! in it. What does that mean? No printer is found under "System devices".
View ArticleRe: Installing printer
Marjean wrote: "USB Printing Support" under Universal Serial Bus controllers shows a yellow warning symbol with a ! in it. What does that mean? If means it's not functioning properly and is probably...
View ArticleRe: Win 8: Automatic repair couldn't repair your PC - What to do?
Thanks for your comment. I have tried to reboot from the Windows 8 Install DVD so that I can access the repair link, but have not been able to force the VM to boot from it. I have tried Esc, changing...
View ArticleClik here to view.
Re: Win 8: Automatic repair couldn't repair your PC - What to do?
I have tried to reboot from the Windows 8 Install DVD so that I can access the repair link, but have not been able to force the VM to boot from it. I have tried Esc, changing the boot device to no...
View ArticleRe: Installing printer
Error message..."Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) USB Options is set to USB 2.0. My iMac, Mid 2010 with USB 3.0. I installed...
View ArticleClik here to view.
Re: Installing printer
If you still have a Flag in Device Manager with USB then you're going to need to correct it before the printer is going to work! At this point I do not see this as a VMware Fusion issue per se and is...
View Article